Linux version 2.6.22.19-72.e18 (root@raphael-desktop) (gcc version 4.1.2 20070626 (e 4.1.2-14)) #1 SMP Thu May 14 10:29:20 EDT 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000078001c00 (usable) BIOS-e820: 0000000078001c00 - 000000007c201c00 type 209 BIOS-e820: 000000007c201c00 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1024MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f9750 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 491521) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 491521 early_node_map[1] active PFN ranges 0: 0 -> 491521 On node 0 totalpages: 491521 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2048 pages used for memmap HighMem zone: 260097 pages, LIFO batch:31 DMI present. Using APIC driver default ACPI: RSDP 000F9720, 0024 (r2 PTLTD ) ACPI: XSDT 7BCD404B, 0064 (r1 FSC PC 60000 LTP 0) ACPI: FACP 7BCD7C30, 00F4 (r3 FSC PC 60000 FSC 3) ACPI: DSDT 7BCD40AF, 3B0D (r1 FSC D2840/A1 60000 MSFT 3000001) ACPI: FACS 7BCDAFC0, 0040 ACPI: TCPA 7BCD7D24, 0032 (r1 Phoeni x 60000 TL 0) ACPI: _MAR 7BCD7D56, 0030 (r1 Intel OEMDMAR 60000 LOHR 1) ACPI: SLIC 7BCD7D86, 0176 (r1 FSC PC 60000 LTP 0) ACPI: MCFG 7BCD7EFC, 003C (r1 PTLTD MCFG 60000 LTP 0) ACPI: HPET 7BCD7F38, 0038 (r1 PTLTD HPETTBL 60000 LTP 1) ACPI: APIC 7BCD7F70, 0068 (r1 PTLTD APIC 60000 LTP 0) ACPI: BOOT 7BCD7FD8, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:78000000) Built 1 zonelists. Total pages: 487681 Kernel command line: root=UUID=b624284c-fe65-4a27-a1b4-a616d8c5c081 panic=10 quiet ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07ed000 soft=c07cd000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2499.988 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1943552k/1966084k available (2448k kernel code, 21336k reserved, 1124k data, 276k init, 1048580k highmem) virtual kernel memory layout: fixmap : 0xffc55000 - 0xfffff000 (3752 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0783000 - 0xc07c8000 ( 276 kB) .data : 0xc06640aa - 0xc077d284 (1124 kB) .text : 0xc0400000 - 0xc06640aa (2448 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 5003.41 BogoMIPS (lpj=10006821) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0400e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07ee000 soft=c07ce000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4999.90 BogoMIPS (lpj=9999800) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0400e39d 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0400e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a Total of 2 processors activated (10003.31 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1408 bytes migration_cost=57 Time: 9:35:04 Date: 08/29/109 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xfde15, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 11 12 14 15) *5 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 9 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 pnp: 00:02: iomem range 0xfec00000-0xfecfffff could not be reserved pnp: 00:02: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:02: iomem range 0xf8000000-0xfbffffff could not be reserved pnp: 00:02: iomem range 0xfed19000-0xfed19fff has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: fc400000-fc4fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: fc500000-fc5fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 266k freed Simple Boot Flag at 0x43 set to 0x80 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1254216904.548:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 9:181:577 Freeing unused kernel memory: 276k freed Write protecting the kernel read-only data: 856k SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x000118e8 ctl 0x000118de bmdma 0x000118c0 irq 19 ata2: SATA max UDMA/133 cmd 0x000118e0 ctl 0x000118da bmdma 0x000118c8 irq 19 ata1.00: ATA-8: ST3160318AS, CC44, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2.00: ATAPI: HL-DT-STDVD-ROM DH10N, 0F03, max UDMA/100 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3160318AS CC44 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM DH10N 0F03 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 8139too Fast Ethernet driver 0.9.28 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected intel_rng: FWH not detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 17 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 22 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfc600000 eth0: RealTek RTL8139 at 0xf8820000, 00:21:91:e2:c8:fc, IRQ 20 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 21 (level, low) -> IRQ 21 eth1: RealTek RTL8139 at 0xf88d2000, 00:21:91:e2:c8:4d, IRQ 21 eth1: Identified 8139 chip type 'RTL-8100B/8139D' ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 208836k swap on /dev/sda2. Priority:-1 extents:1 across:208836k intel_rng: FWH not detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Netfilter messages via NETLINK v0.30. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] CAPI Subsystem Rev 1.1.2.8 capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller eth0: no IPv6 routers present Bridge firewalling registered device eth0 entered promiscuous mode audit(1254209727.752:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 br0: port 1(eth0) entering learning state Ebtables v2.0 registered br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state ip6_tables: (C) 2000-2006 Netfilter Core Team br0: port 1(eth0) entering disabled state br0: port 1(eth0) entering disabled state eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 br0: port 1(eth0) entering learning state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready eth1: link down ADDRCONF(NETDEV_UP): eth1: link is not ready